Anvar Rashitovich VALEEV, Aleksey Nikolaevich ZOTOV, Marat Midhatovich GALIULLIN, Timur Airatovich YANBARISOV

УДК 62-752


A. R. Valeev / News of the Ural State Mining University. 2018. Issue 4(52), pp. 74-83

The relevance of the work is due to the need to develop new means of highly efficient vibration protection. One such means is a vibration isolator with quasi-zero stiffness. They are quite sensitive elements, so the problem of designing and operating vibration isolators with quasi-zero stiffness is relevant. Nowadays, comprehensive studies on their work within a group have not yet conducted.
Purpose of the work is to study the sensitivity of vibration isolators with quasi-zero stiffness to the errors of geometric parameters while their manufacture.
Methodology of research. This work is a continuation of the experimental studies of plate-type universal vibration isolators with quasi-zero stiffness. For the research, an analytical study and a computer-based multiple experimental procedure with random input data were used.
Results. Analytical studies show that vibration isolators with quasi-zero stiffness are very sensitive objects. Basic properties, such as workload and stiffness under workload, largely depend on key parameters. Vibration isolators of plate type have a very strong dependence of the workload on the external and internal radii, the height of the cone and the wall thickness. The dynamics of a group of vibration isolators was analysed. Due to the deviation of different parameters and the nonlinearity of the power characteristics, the behaviour of the group does not coincide with the average behaviour of one vibration isolator. It has been found that for a group of isolators there is a slight increase in workload. Moreover, deviations in parameters lead to a decrease in stiffness.
Conclusions. The high sensitivity of installed vibration isolators with quasi-zero stiffness proves that they require careful attention and high precision in manufacturing. The resulting deviations of the behaviour of a group of vibration isolators from the behaviour of a single vibration isolator indicate the need to enter appropriate corrections when designing them, otherwise this may lead to loss of stability and instability of the equipment, which should be avoided.

Keywords: vibration, vibration isolator, quasi-zero stiffness, mathematical simulation, nonlinear oscillations, sensitivity.



1. Hassan R., McManus K. 2002, Perception of low frequency vibrations by heavy vehicle drivers. Journal of Low Frequency Noise, Vibration and Active Control, vol. 21, issue 2, pp. 65–76. https://doi.org/10.1260/026309202761019516
2. Takahashi Y., Harada N. 2007, A consideration of an evaluation index for high-level low-frequency noise by taking into account the effect of human body vibration. Journal of Low Frequency Noise, Vibration and Active Control, vol. 26, issue 1, pp. 15–27. https://doi.org/10.1260/026309207781487501
3. Takahashi Y. 2006, A consideration of the relationship between subjective unpleasantness and body surface vibrations induced by high-level, complex low frequency noise. Journal of Low Frequency Noise, Vibration and Active Control, vol. 25, issue 3, pp. 163–174. http://dx.doi.org/10.1260/026309206779800443
4. Berardi U., Iannace G. 2017, Additive manufacturing for minimizing vibration damages in the water-stop tray of washing machines. Journal of low frequency noise, vibration and active control, vol. 36, issue 2, pp. 193–199. https://doi.org/10.1177/0263092317712017
5. Alabuzhev P. A., Gritchin L., Kim L., Migirenko G., Chon V., Stepanov P. 1989, Vibration Protecting and Measuring Systems with Quasi-Zero Stiffness. N. Y.: Hemisphere Publishing, 100 р.
6. Carrella A. 2008, Passive vibration isolators with high-static-low-dynamic-stiffness. Doctoral Thesis. Southampton: University of Southampton, UK, 226 p. URL: https://eprints.soton.ac.uk/51276
7. Carrella A., Friswell M. I. 2008, A passive vibration isolator incorporating a composite bistable plate. Proceedings of 6th European Nonlinear Dynamics Conference (ENOC-2008). 30 June–4 July. Saint Petersburg. URL: http://lib.physcon.ru/file?id=d343bb8a5a70
8. Carrella A., Brennan M., Waters T. P. 2007, Static analysis for a passive vibration isolator with quasi-zero stiffness characteristic. Journal of Sound and Vibration, vol. 301(3–5), pp. 678–689. https://doi.org/10.1016/j.jsv.2006.10.011
9. Carrella A., Brennan M., Waters T. P. 2007, Optimization of a quasi-zero-stiffness isolator. Journal of Mechanical Science and Technology, vol. 21, pp. 946–949. URL: https://link.springer.com/content/pdf/10.1007/BF03027074.pdf
10. Sun X., Xu J., Jing X., Cheng L. 2014, Beneficial performance of a quasi-zero-stiffness vibration isolator with time-delayed active control. International Journal of Mechanical Sciences, vol. 82, pp. 32–40. http://dx.doi.org/10.1016%2Fj.ijmecsci.2014.03.002
11. Le T. D., Ahn K. K. 2012, Fuzzy sliding mode controller of a pneumatic active isolating system using negative stiffness structure. Journal of Mechanical Science and Technology, vol. 26(12), pp. 3873–3884. https://doi.org/10.1007/s12206-012-0890-9
12. Holtz M. W., Van Niekerk J. L. 2010, Modelling and design of a novel air-spring for a suspension seat. Journal of Sound and Vibration, vol. 329(21), pp. 4354–4366. https://doi.org/10.1016/j.jsv.2010.04.017
13. Ponomaryov Yu. K., Belousov A. I. 2013, Concept development of combined rotors support of turbomachines rotors combined support with elastically-damping elements of hydrodynamic and cable types. Pumps, Turbines, Systems, vol. 2(7), pp. 46–53. (In Russ.). URL: http://jurnal-nts.ru/uploads/journal/21_file.pdf
14. Ponomarev Yu. K., Posohov P. V. 2014, Researching opportunities of characteristics improvement of hummock vibroinsulators with ring elements. New materials and technologies in mechanical engineering, vol. 19, pp. 100–106.
15. Tapia-Gonzales P. E., Ledezma-Ramirez D. F. 2017, Experimental characterization of dry friction isolators for shock and vibration. Journal of Low Frequency Noise, Vibration and Active Control, vol. 36(1), pp. 83–95. https://doi.org/10.1177/0263092317693509
16. Le T. D., Ahn K. K. 2011, A vibration isolation system in low frequency excitation region using negative stiffness structure for vehicle seat. Journal of Sound and Vibration, vol. 330(26), pp. 6311–6335. https://doi.org/10.1016/j.jsv.2011.07.039
17. Maciejewski I., Meyer L., Krzyzynski T. 2009, Modelling and multi-criteria optimization of passive seat suspension vibro-isolating properties. Journal of Sound and Vibration, vol. 324(3–5), pp. 520–538. https://doi.org/10.1016/j.jsv.2009.02.021
18. Ishida S., Suzuki K., Shimosaka H. 2017, Design and Experimental Analysis of Origami-Inspired Vibration Isolator With Quasi-Zero-Stiffness Characteristic. Journal of Vibration and Acoustics, vol. 139(5). 051004. https://doi.org/10.1115/1.4036465
19. Zhou J., Wang X., Xu D., Bishop S. 2015, Nonlinear dynamic characteristics of a quasi-zero stiffness vibration isolator with cam-roller-spring mechanisms. Journal of Sound and Vibration, vol. 346, June, pp. 53–69. https://doi.org/10.1016/j.jsv.2015.02.005
20. Choi S. B., Han Y. M. 2007, Vibration control of electrorheological seat suspension with human-body model using sliding mode control. Journal of Sound and Vibration, vol. 303, issues 1–2, pp. 391–404. https://doi.org/10.1016/j.jsv.2007.01.027
21. Choi S. B., Nam M. H., Lee B. K. 2000, Vibration control of a MR seat damper for commercial vehicles. Journal of Intelligent Material Systems and Structures, vol. 11(12), pp. 936–944. https://doi.org/10.1106/AERG-3QKV-31V8-F250
22. Gan Z., Hillis A. J., Darling J. 2015, Adaptive control of an active seat for occupant vibration reduction. Journal of Sound and Vibration, vol.349, pp. 39–55. https://doi.org/10.1016/j.jsv.2015.03.050
23. Kawana M., Shimogo T. 1998, Active suspension of truck seat. Shock and Vibration, vol. 5(1), pp. 35–41. http://dx.doi.org/10.1155/1998/579025
24. Robertson W., Wood R., Cazzolato B., Zander A. 2006, Zero-stiffness magnetic springs for active vibration isolation. Proceedings of the 6th International Symposium on Active Noise and Vibration Control (9–12 July): CD-ROM. Cairns, Australia, URL: http://hdl.handle.net/2440/35429
25. Ning D., Sun S., Zhang J., Du H., Li W., Wang X. 2016, An active seat suspension design for vibration control of heavy-duty vehicles. Journal of low frequency noise, vibration and active control, vol. 35(4), pp. 264–278. https://doi.org/10.1177/0263092316676389
26. Zheng Y., Zhang X., Luo Y., Yan B., Ma C. 2016, Design and experiment of a high-static–low-dynamic stiffness isolator using a negative stiffness magnetic spring. Journal of Sound and Vibration, vol. 360, pp. 31–52. https://doi.org/10.1016/j.jsv.2015.09.019
27. Gohari M., Tahmasebi M. 2015, Active Off-Road Seat Suspension System Using Intelligent Active Force Control. Journal of Low Frequency Noise, Vibration and Active Control, vol. 34(4), pp. 475–489. https://doi.org/10.1260%2F0263-0923.34.4.475
28. Valeev A. R., Zotov A. N., Tikhonov A. Yu. 2010, Vibrated insulating suspension with quasi-zero-stiffness. Problems of gathering, treatment and transportation of oil and oil products, no. 3, pp. 68–77. (In Russ.). URL: https://elibrary.ru/item.asp?id=15203188
29. Valeev A. R., Zotov A. N., Kharisov Sh. A. 2015, Designing of compact low frequency vibration isolator with quasi-zero stiffness. Journal of low frequency noise, vibration and active control, vol. 34(4), pp. 459–474. https://doi.org/10.1260%2F0263-0923.34.4.459


Лицензия Creative Commons
All articles posted on the site are available under the Creative Commons Attribution 4.0 Global License.